Distribution Transformer

Distribution Transformer

Distribution Transformer Supplier and Manufacturer

Most transformers perform silently for years. Issues arise when transformers have been sized improperly, manufactured poorly or have been shipped without proper documentation. Our reliable Distribution Transformer Supplier takes care of these issues before we even make the sale.

In the background, our competent Distribution Transformer Manufacturer will design, wind, test and ship each transformer according to your network requirements.

Be it a simple rural feeder system or a complex factory with multiple units, our objective remains the same: efficient and safe electricity without any surprises.


Our Distribution Transformer Range

We have three families that take care of most low-voltage network requirements. Whatever you choose, the transformer will be manufactured to your exact specifications.

Choose by Installation Style

Type Best for Notes
Oil-immersed Substations, feeders and industry 11kV and 33kV models
Pole and pad-mounted Overhead lines and compact sites Single- and three-phase
Sealed Humid or low-maintenance sites Oil kept from outside air

Choose your family of transformer and the Distribution Transformer Supplier will be able to mix transformer types in the same order.

Sizes and Efficiency

The catalogued models are available in 50kVA, 200kVA and 1000kVA sizes and any worthy Distribution Transformer Supplier will offer custom ratings.

Amorphous winding units minimise no-load losses, and an experienced Distribution Transformer Manufacturer will recommend such transformers for light loads.


Technical Specifications

For quoting a Distribution Transformer Supplier will need six pieces of information:

  • kVA: load capacity at present and future growth
  • Voltage: high and low voltage levels of your network
  • Vector group: configuration of the windings, for example Dyn11
  • Impedance: determines fault level and voltage drop
  • Tapping: adjusts voltage of the secondary winding when there is variation in the supply voltage
  • Losses: no-load and load values that determine operating cost

Higher impedance decreases fault current but increases voltage drop, and the value has to match your network.

The values will be derived from your network study and a good Distribution Transformer Manufacturer will ensure the values meet the local standards.


Key Features and Benefits

Built for Long Service

Good construction ensures a long useful life, lasting decades. High-quality windings and a durable tank can handle short circuits easily, and proper cooling will ensure constant temperatures.

Lower Cost of Ownership

A low-loss design results in reduced energy bills each year, and a low maintenance schedule will keep your maintenance time short.

Easy to Install and Service

Compact dimensions, nameplates, and readily available fittings make installation and inspection easy.


Standard and Optional Accessories

A good Distribution Transformer Supplier should list the accessories separately. Accessories usually provided include:

  • Oil level gauge
  • Oil temperature gauge
  • Pressure release mechanism
  • Tap changer off-circuit
  • Lifting eye and drain valve
  • Earthing point and nameplate

Optional accessories available are:

  • Winding temperature gauge
  • Buchholz relay in bigger sizes
  • Surge arresters and cable boxes
  • Marshalling box for remote signalling

The choice of the accessories depends upon the distribution transformer manufacturer to suit your protection scheme, not vice versa.

Just give us your protection scheme and we will suggest the accessories required.


Applications

Utilities and rural grids: tough units that require minimal maintenance, hence the preference of utilities for a reliable Distribution Transformer Supplier.

Cities and campuses: silent, reliable supply of power for homes, office buildings, and commercial businesses from a Distribution Transformer Supplier familiar with local codes.

Industry: factories and workshops require units that can cope with load variations and harmonics, hence careful sizing of the units from a Distribution Transformer Manufacturer.

Renewables and infrastructure: solar and wind farms, mines, and ports depend on consistent low voltage distribution.


Quality, Testing and Warranty

All units after manufacture are tested for quality control before delivery and every Distribution Transformer Supplier should provide documentation to prove that. Routine testing includes:

  • Winding resistance test
  • Voltage ratio and vector groups
  • No-load & load loss test
  • Impedance voltage test
  • Insulation withstand test

From quotation to delivery:

  1. Drawings and data are mutually agreed upon by you
  2. Unit manufacture and inspection
  3. Routine testing and report generation
  4. Unit packing and shipment under customs clearance assistance

Test report and warranty documentation are provided with the responsibility of the Distribution Transformer Manufacturer

With test reports and approved drawings, your engineers can study the unit without doubt.

Terms of warranty are included in your quotation and agreement; hence, no Distribution Transformer Supplier will be able to surprise you with anything else.


Why Choose Us

Weifan Electrical Technology Co., Ltd. has been manufacturing power equipment for over 20 years now and has supplied to over 80 different countries. As a Distribution Transformer Supplier, our mission statement is straightforward: clear information and prompt delivery.

  • Engineers who will check your specifications before manufacturing
  • International logistics services including transportation, clearance and warehousing
  • Online 24-hour customer service provided by our after-sales department, just like a good Distribution Transformer Supplier does
  • One-stop shop for all types of power transformers, dry-type transformers, switchgear and earthing systems

A number of Distribution Transformer Manufacturers promise high quality, but we guarantee it with our inspections, documents and test reports.

A prompt and reliable Delivery by a Distribution Transformer Supplier is what buyers appreciate.

Ready to order your transformer? Just provide us with the information regarding kVA, voltage and location. That is all a Distribution Transformer Supplier needs.


Frequently Asked Questions

1. How do I pick kVA for a growing area or factory?

Begin with today’s peak load, then add a margin for planned growth. Look at the daily load pattern too, since a unit running near full load all day ages faster. If growth is uncertain, send your forecast and we will suggest a suitable rating.

2. Which vector group should I choose?

Dyn11 is a common choice because it provides a low-voltage neutral and copes well with unbalanced loads. Local utility rules may call for another group, so share them early.

3. How do I reduce losses over the transformer life?

Select a low-loss design, such as an amorphous coil unit, and match the size to the real load. Compare lifetime cost, not just the purchase price.

4. Why is my transformer overheating and how do I prevent it?

Typical causes are overload, blocked airflow, high ambient heat, harmonics and loose connections. Prevent it with correct sizing, clear space around the unit, tight terminals, regular oil checks and temperature monitoring.

5. What accessories and protections should be included?

Aim for an oil level gauge, temperature indicator, pressure relief device, earthing terminals and rating plate. Add surge arresters, fuses or a Buchholz relay depending on network and unit size.

WhatsApp WhatsApp QR Code

Get in touch


    (jpg、jpeg、png、pdf、doc、docx、xls、xlsx、csv、txt)